Showing posts with label cad text problem. Show all posts
Showing posts with label cad text problem. Show all posts

Friday, February 11, 2011

Annotation


 Annotative Text 
..... continued from last section.


  • Another way of setting the text height properly is by setting the annotation scale using the toolbar at the bottom of the screen. By default it is set at 1:1
  •  You can also change existing non annotative text to annotative by changing the text’s Annotative property  to Yes. This applies to any text created through text styles or through the TEXT and MTEXT commands.
  • You can set the orientation of annotative text objects to match the orientation of the paper..

Wednesday, February 9, 2011

Text confusion

Annotative Text
In one of my earlier article with the title “ Text size confusion” I had given a method by which one can ensure that the height of printed text is correct on paper. In other words, the printed text is of the desired size , not to big to be irritating or not to small so as to be unreadable. The method was a simple one , for a layman or for new user of autocad. However if one is familiar with the “TEXT STYLE” command , then the problem can be solved very easily or in fact there will not be any problem.
The concept of annotative text should be used for the purpose. Here either
  1. You are sure of the scale at which the drawing is going to be printed
  2. You are going to use viewports and layouts for printing.
1) The Annotative Scale should be defined in Text Style dialog box. Where you can attach the “annotative” property to the text. In that case there will option available for setting the “Paper Text Height”, which is the height of the text when the drawing is printed at the desired scale.

Use annotative text for notes and labels in your drawing. You create annotative text by using an annotative text style, which sets the height of the text on the paper.

The current annotation scale automatically determines the display size of the text in model space or paper space viewports.

For example, you want text to display at a height of 3/16" on the paper, so you can define a text style to have a paper height of 3/16". When you add text to a viewport that has a scale of 1/2"=1'0", the current annotation scale, which is set to the same scale as the viewport’s, automatically scales the text to display appropriately at 4.5".

....to be continued

Monday, May 25, 2009

text size confusion

the size of printed text always gives headaches to many users.
many times after the drawing is printed, the text is found either too large or too small. this results in repeat prints, loss of time, paper wastage and extra expenses( if u r using outside plotting service)
the problem can be taken care of by following a simple rule.

decide the size of text required after printing. ( viz height of text in mm. e.g 5 mm)
choose the scale at which u r going to get a printout. say 1:100
then use the text height as 500 mm ( text height X scale ) ( or 0.5M) when u r typing text in acad dialog box. follow same rule for diff text heights in ur drg.
just be happy that u wont hv to reprint due to incorrect text height.
enjoy!!!!!!!!!!!!!!1